10 Pair 1/8″ X 6″ – Machinist’s Thin Parallel Bar Set

#ad
#ad
TFT Tools #ad - Includes 10 pairs of the following heights: 1/2", 1", 1-1/8", 1-3/8", 3/4", 5/8", 1-1/4", 7/8", 1-1/2" & 1-5/8". Made from high quality tool steel- stress relieved against distortion, precision ground and hardened Parallel and accurate within +/-. 0002" and made from high quality tool steel- stress relieved against distortion, precision ground and hardened.

. Each parallel is 1/8" thick x 6" long with 2 holes. Thin parallel set 1/8" 10 Pair 00003" steel our part # all-54100 .

More information about TFT Tools #ad



Mitutoyo 050101, Edge Finder, 3/8" Dia. Shank, .200" Dia. Tip

#ad
#ad
Mitutoyo 50101 #ad - Used in a milling machine to find the workpiece edge. All working surfaces are hardened and ground. Mitutoyo edge finder, shank Dia: 3/8", Tip Dia:. 200".

More information about Mitutoyo 50101 #ad


Similar products





BL-123 Pair of 1" x 2" x 3" Precision Steel 1-2-3 Blocks

#ad
#ad
1-2-3 Blocks 54988 #ad - Precision ground. Used in a milling machine to find the workpiece edge. All working surfaces are hardened and ground. Squareness of all sides is within. 0002 per inch. Heat treated above 48 Rockwell "C";. 0001 to. 0003 over allowance for nominal lapping. Case hardened. Cross-drilling design for extra strength and minimum weight.

Five 3/8-16 tapped holes are provided for clamping.

More information about 1-2-3 Blocks 54988 #ad


Similar products





7/8" Mill Chuck Holder for Bridgeport .0006 - 13pcs Precision R8 Collets Set 1/8

#ad
#ad
Genenic #ad - Accuracy. 0006" tir. Precision ground. Hardened and ground throughout. Precision ground to close tolerance. Drawbar thread: 7/16"-20 Case hardened. Cross-drilling design for extra strength and minimum weight. Five 3/8-16 tapped holes are provided for clamping. Size: 1/8" 3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4" 13/16" 7/8".

All working surfaces are hardened and ground. Item description: size: 1/8" 3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4" 13/16" 7/8" Accuracy. 0006" tir drawbar thread: 7/16"-20 material:65mn hardness:clamping part hrc 55-60 elastic part HRC 40-45 Applicable:This unit is applicable to all sorts of milling machines, which spindle taper hole is R8.

7/8" Mill Chuck Holder for Bridgeport .0006 - 13pcs Precision R8 Collets Set 1/8 #ad - Used in a milling machine to find the workpiece edge.

More information about Genenic #ad


Similar products





Mitutoyo 050103, Edge/Center Finder, 3/8" Diameter Shank, 0.200" Diameter Tip

#ad
#ad
Mitutoyo 50103 #ad - Precision ground to close tolerance. Centerfinder end is used to find hole centers, and aline the spindle with a punch mark or scribed line. All working surfaces are hardened and ground. Used in a milling machine to find the workpiece edge. Used in a milling machine to find the workpiece edge. Precision ground.

Case hardened. Cross-drilling design for extra strength and minimum weight. Five 3/8-16 tapped holes are provided for clamping. Size: 1/8" 3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4" 13/16" 7/8". Accuracy. 0006" tir. Hardened and ground throughout. All working surfaces are hardened and ground. Drawbar thread: 7/16"-20

Mitutoyo 050103, Edge/Center Finder, 3/8" Diameter Shank, 0.200" Diameter Tip #ad - Mitutoyo edge/center Finder with 3/8" Shank Diameter, 0200" tip diameter, and cone-shaped center finder.

More information about Mitutoyo 50103 #ad


Similar products





Anytime Tools 5 Lathe Mill CENTER DRILL COUNTERSINK Bit Tooling SET

#ad
#ad
Anytime Tools AT200536 #ad - Case hardened. Cross-drilling design for extra strength and minimum weight. Five 3/8-16 tapped holes are provided for clamping. Size: 1/8" 3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4" 13/16" 7/8". Drawbar thread: 7/16"-20 . All working surfaces are hardened and ground. Sizes 1, 3, 4 and 5, 2, 60° tip angles.

Precision ground. Top quality m2 hss drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes in stock. Hardened and ground throughout. Used in a milling machine to find the workpiece edge. Used in a milling machine to find the workpiece edge. Centerfinder end is used to find hole centers, and aline the spindle with a punch mark or scribed line.

Anytime Tools 5 Lathe Mill CENTER DRILL COUNTERSINK Bit Tooling SET #ad - Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes. Precision ground to close tolerance. All working surfaces are hardened and ground. Sizes 1, 3, 4 and 5, 2, 60° tip angles. Accuracy. 0006" tir.

More information about Anytime Tools AT200536 #ad


Similar products





Anytime Tools Test Dial Indicator 0.0005" 0-15-0 and Universal Holder Quill Clamp For Bridgeport Mill Machine Clamping Diameter 1-7/8"

#ad
#ad
Anytime Tools #ad - Accuracy. 0006" tir. Precision ground to close tolerance. All working surfaces are hardened and ground. High quality professional grade Tool This is the best companion for your BRIDGEPORT. Length from clamping bracket to indicator 4-1/2". Clamping diameter 1-7/8". Test indicator features: easy to read 1-3/16" white face with crisp black markings 7 JEWELS bearings Durable satin chrome finish Carbide probeGraduations: 0

0005'' per line universal holder features: all metal construction washers are nylon clamping diameter 1-7/8" length from clamping bracket to indicator 4-1/2" Reach from 0-12" diameter Suitable for all indicators with 5/32" shank stud Adapts immediately for positive and fast indicating Mounts with single pressure screw directly on machine quill, bypassing the working tool Frame is designed with bearing pads properly spaced and an opposite pressure screw securing the rigidity of the mounting The desired stiffness is adjustable and is not altered by the pivoting of the jointsPadded case included! Used in a milling machine to find the workpiece edge.

Anytime Tools Test Dial Indicator 0.0005" 0-15-0 and Universal Holder Quill Clamp For Bridgeport Mill Machine Clamping Diameter 1-7/8" #ad - Sizes 1, 3, 2, 4 and 5, 60° tip angles. Test indicator 00005" 0-15-0 included. Top quality M2 HSS. Mounts with single pressure screw directly on machine quill, bypassing the working tool. Precision ground. Hardened and ground throughout.

More information about Anytime Tools #ad


Similar products





Türlen Precision TEST DIAL INDICATOR 7 JEWELS .0005" 0-15-0

#ad
#ad
Türlen #ad - All working surfaces are hardened and ground. Case hardened. Cross-drilling design for extra strength and minimum weight. Five 3/8-16 tapped holes are provided for clamping. Size: 1/8" 3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4" 13/16" 7/8". Top quality M2 HSS. Features: easy to read 1-3/16'' white face with black markings 7 JEWELS Crisp graduations Durable satin chrome finish Graduations: 0

0005'' per line includes a padded case Used in a milling machine to find the workpiece edge. Length from clamping bracket to indicator 4-1/2". Hardened and ground throughout. Used in a milling machine to find the workpiece edge. Includes a padded case. Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes.

Türlen Precision TEST DIAL INDICATOR 7 JEWELS .0005" 0-15-0 #ad - Sizes 1, 2, 3, 4 and 5, 60° tip angles. Test indicator 00005" 0-15-0 included. Clamping diameter 1-7/8". All working surfaces are hardened and ground.

More information about Türlen #ad


Similar products





HFS Ultra Precision 1-2-3" Blocks 2pcs/pair , 0.0001" Plastic Case

#ad
#ad
HardwareFactoryStore.com #ad - Case hardened. Cross-drilling design for extra strength and minimum weight. Five 3/8-16 tapped holes are provided for clamping. Size: 1/8" 3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4" 13/16" 7/8". Squareness on all sides is 00003" per inch. Clamping diameter 1-7/8". Drawbar thread: 7/16"-20 All working surfaces are hardened and ground.

Reach from 0-12" diameter. Layout and inspection jobs product features has 23 holes with 5 holes tap to 3/8-16 threads for clamping and 18 untapped holes Made of hardened tool steel and precision ground on all six sides Cross drilling design allows efficient use of lower weight with maximum strength Heat treat and hardness 56 to 60 RC 2 pieces per set Weight: 2.

HFS Ultra Precision 1-2-3" Blocks 2pcs/pair , 0.0001" Plastic Case #ad - 1 lbs used in a milling machine to find the workpiece edge. Length from clamping bracket to indicator 4-1/2". Easy to read 1-3/16'' white face with black markings. Pairs are matched to a tolerance of 00001". All working surfaces are hardened and ground. Precision ground to close tolerance. Size within +/-.

More information about HardwareFactoryStore.com #ad


Similar products





AUTOTOOLHOME 1/8" 3/16" 1/4" 5/16" 3/8" 1/2"high Speed Steel HSS 4 Flute Straight End Mill Cutter Set of 6

#ad
#ad
JYC International Trade Co., Ltd. ZH0095 #ad - Crisp graduations 00005'' per line. Product name : end mill;material : hss color : gray 01:1/2"x1/2", Cutting Diameter:1/2", Cutting Depth:1. 57", cutting diameter:1/4", shank diameter:1/4" 03:3/8"x3/8", cutting depth:1", cutting Diameter:3/8", Shank Diameter:1/2" 02:1/4"x1/4", Cutting Depth:/1.7", shank diameter:1/4" suit for: hrc: 45 degrees , helix angle 30 degrees 4 flute end mill cutter package content : 6 x end mill usage: --end mill bits are used for side milling, end milling, finish machining, cutting Depth:1", Shank Diameter:5/16" 06:1/8"x1/4", Cutting Depth:4/5", Shank Diameter:3/8" 04:3/16"x1/4", Cutting Diameter:5/16", Cutting Diameter:1/8", Cutting Depth:3/4", Cutting Diameter:3/16", Shank Diameter:1/4" 05:5/16"x5/16", etc.

Flatness and parallelism within. 0001". Why choose autotoolhome -- Good quality and reliable brand. Centerfinder end is used to find hole centers, and aline the spindle with a punch mark or scribed line. Used in a milling machine to find the workpiece edge. 7 jewels. Suitable for all indicators with DOVETAIL or 5/32" shank stud.

AUTOTOOLHOME 1/8" 3/16" 1/4" 5/16" 3/8" 1/2"high Speed Steel HSS 4 Flute Straight End Mill Cutter Set of 6 #ad - Squareness on all sides is 00003" per inch.

More information about JYC International Trade Co., Ltd. ZH0095 #ad


Similar products





6 Inch Jaw Width - Drill Press Vise Milling Drilling Machine Bench Clamp Clamping Vice 6'' - Happybuy 6 Inch ACCU Lock Down Vise Precision Milling Vice

#ad
#ad
Ruian Yisui fuzhuang shanghang OrangeA 6 Inch ACCU Lock Down Vise Preci #ad - The main attachments for milling, drilling machine, it is paticularly suitable for the finishing of precision parts. Precision ground. Suitable for all indicators with DOVETAIL or 5/32" shank stud. Used in a milling machine to find the workpiece edge. Flatness and parallelism within. 0001". Apply to carbon steel, tool steel, aluminum, titanium, etc.

The bottom of end mill bits is u-shaped groove design, convenient for chip removal, large front angle effectively reduces cutting resistance, sharp and durable, further improve machining efficiency.6'' accu lock vise milling machine; jaw width: 6"; jaw opening: 5. 9"; jaw height: 1-3/4"; Gross Weight: 59.

6 Inch Jaw Width - Drill Press Vise Milling Drilling Machine Bench Clamp Clamping Vice 6'' - Happybuy 6 Inch ACCU Lock Down Vise Precision Milling Vice #ad - 4lbs. Durable satin chrome finish. Product name : end Mill;Material : HSS. The precision milling drilling vise is ideal for milling, drilling machine; It is particularly suitable for the finishing of precision parts. 59. 4lbs note: - handle with care, avoid rough operation which might shorten its lifespan - Keep children away from the machine Package: 1 X 6" Precise Clamping Lock Vice Used in a milling machine to find the workpiece edge.

Crisp graduations 00005'' per line.

More information about Ruian Yisui fuzhuang shanghang OrangeA 6 Inch ACCU Lock Down Vise Preci #ad


Similar products