As an Amazon Associate I earn from qualifying purchases.
Project Patio #ad - Please measure and confirm your size before ordering! Protects - our non-scratching outdoor table and chair leg protectors will prevent scratches and damage to your surface.
Relief - after installing these replacement leg caps, expect the smoother movement of your lawn furniture and say goodbye to that screeching sound every time you move a table or chair. Is this the size you need? these are not a universal fit! These glides install inside wrought iron furniture feet cups with a 1-1/2" inside diameter.
APPLIANCEMATES #ad - 3 align the new caps with the opening and tap it with rubber mallet. Be made of high-quality outdoor-ready plastic. Quality warrantythe replacement part is made from durable high quality material and well-tested by manufacturer.
Or you can hold them in place with one hand and using a crescent wrench with he other. 2 clean the position of the glides. Installation1 use a flat-head screwdriver to pry out the broken old cap.
Package includes24 outdoor patio furniture chair glides cap replacement pieces. These glides fit very snugly into a cup size. Tipspatio furniture leg cap size reference 1-1/2" 1. 5 inches is to the size of the “cup” inside diameter on the bottom of the chair or foot area where the glide should be installed.
AR-PRO #ad - Easy installation: the only tool you might need is a flat head screwdriver that removes the old, broken ones from the furniture, please do not use hammer when installing the replacement. Our replacement glides are perfect for wrought iron furniture that have 1.
14-inch inner diameter, heavy duty plastic, 1 1/4” outside diameter on the bottom of the feet for less cost from the OEM yet is made of premium, improving the part’s life span by at least 50%.
The glides tend to break over time so it’s good to have spare units on hand whenever needed. Our 48-pack is good for up to 12 chairs or tables. Please make sure to measure the actual furniture before your purchase. It takes less than 1 minute to replace one chair. 40 day money back - any reason you are not happy with your purchase? No problem, we offer 40-day money back policy so you can shop with worry free! .
Sunniland Patio #ad - Always scrape away any worn metal or parts from the old cap BEFORE measuring and installing. Protects your patio surface, patio chair feet and patio legs from damage.
Please be sure to measure accurately -measure the cleaned opening inside diameter. We also offer one to fit 1 1/2" and is slightly more common size. Provides a smoother movement of furniture, allowing patio furniture to slide over the surface of your patio.
Sunniland Patio #ad - Please measure accurately. Heavy duty deluxe wrought iron chair Glides : fit a 1-1/2" inside diameter cup on patio furniture feet. Be sure to measure the inner diameter of the cup area to purchase the correct glide. Provides a smoother movement of furniture, allowing patio furniture to slide over the surface of your patio.
JSP Manufacturing #ad - Quantity: 48 glide caps ~ color: black ~ made in USA! Fits wrought iron chair and table legs where cup in the bottom of the legs measures 1.
5 inches in diameter. Prevent scratching on your patio floors, while providing smoother furniture movement ~ Convenient weep holes - keeps moisture and condensation out and avoids damage to your patio furniture legs.
Sunniland Patio #ad - Be sure to measure the inner diameter of the hole to purchase the correct glide. Shaft refers to part that fits up into frame is 3/16" long. These stem bumper chair glides fit a 15/64" diameter hole on patio furniture swivel rockers.
Protects your patio surface, patio chair feet and patio legs from damage. Base actual part touching floor is 1/2". Stop the screech!! provides a smoother movement of furniture, allowing patio furniture to slide over the surface of your patio.
Project Patio #ad - Please measure and confirm your size before ordering! Protects - our non-scratching outdoor table and chair leg protectors will prevent scratches and damage to your surface. Installation - easy to install with no adhesive needed.
They also stop rust marks from staining your flooring. Relief - after installing these replacement leg caps, expect the smoother movement of your lawn furniture and say goodbye to that screeching sound every time you move a table or chair.
Sunniland Patio #ad - Please be sure to measure the inner diameter of the hole to purchase the correct glide. Using drill bits -test sizes until you find a fit. Protects your patio surface, patio chair feet and patio legs from damage.
If hole is smaller- you can drill out to 1/4". Glide installs inside the holes on the round base of swivel chairs. Stop the screech!! provides a smoother movement of furniture, allowing patio furniture to slide over the surface of your patio.
1. Project Patio
#adProject Patio 1-1/2" Wrought Iron Patio Furniture Feet Glides and Outdoor Chair Leg Floor Protectors, End Cap Insert Cup Sliders, 24 Pack
#adRelief - after installing these replacement leg caps, expect the smoother movement of your lawn furniture and say goodbye to that screeching sound every time you move a table or chair. Is this the size you need? these are not a universal fit! These glides install inside wrought iron furniture feet cups with a 1-1/2" inside diameter.
More information #ad
Installation - the furniture leg caps install by using a rubber hammer or mallet. See images. They also stop rust marks from staining your flooring. Remove any dirt, rust, debris, etc. Before installing. Quality - the patio furniture feet are thick, UV-resistant plastic designed to withstand the outdoor elements.| Brand | Project Patio #ad |
| Manufacturer | Project Patio #ad |
| Height | 0.65 Inches |
| Length | 1.7 Inches |
| Weight | 0.24 Pounds |
| Width | 1.5 Inches |
| Part Number | DeluxeCap1.5 |
| Model | Deluxe |
More information #ad
2. APPLIANCEMATES
#ad24 Pack Wrought Iron Patio Furniture Glides 1-1/2 inch Outdoor Chair Leg Feet Protector Deluxe Version Round Chair Table Leg Caps Replacement Protect Outdoor Patio Floor from Scratches Black
#adOr you can hold them in place with one hand and using a crescent wrench with he other. 2 clean the position of the glides. Installation1 use a flat-head screwdriver to pry out the broken old cap.
More information #ad
Item specificationchair glides cap approx 1-1/2" in diameter, thickness 008", and 05" height, flexible plastic and clear. Fits oem standards! for any reason that you're not satisfied, you can ask for a replacement or full refund. Package includes24 outdoor patio furniture chair glides cap replacement pieces. These glides fit very snugly into a cup size. Tipspatio furniture leg cap size reference 1-1/2" 1. 5 inches is to the size of the “cup” inside diameter on the bottom of the chair or foot area where the glide should be installed.
| Brand | APPLIANCEMATES #ad |
| Manufacturer | APPLIANCEMATES #ad |
| Height | 0.39 Inches |
| Length | 0.39 Inches |
| Width | 1.5 Inches |
| Part Number | B-Patio Glides-24 |
More information #ad
3. AR-PRO
#ad1-1/4"Inside Diameter Patio Chair Glides Replacement 48-Pack for Outdoor Wrought Iron Furniture Legs-The Ultimate Protection to Help Shield Both Furniture and The Floor-for Up to 12 Chairs/Tables
#ad14-inch inner diameter, heavy duty plastic, 1 1/4” outside diameter on the bottom of the feet for less cost from the OEM yet is made of premium, improving the part’s life span by at least 50%.
More information #ad
Don’t wait! replace the worn-out glides today to help shield both furniture and the floor. Value-pack: you are getting 48 packs from the package, which is the best value on market right now. Please double check the size. The glides tend to break over time so it’s good to have spare units on hand whenever needed. Our 48-pack is good for up to 12 chairs or tables. Please make sure to measure the actual furniture before your purchase. It takes less than 1 minute to replace one chair. 40 day money back - any reason you are not happy with your purchase? No problem, we offer 40-day money back policy so you can shop with worry free! .
| Brand | AR-PRO #ad |
| Manufacturer | AR-PRO #ad |
More information #ad
4. Sunniland Patio
#ad1-1/4" Wrought Iron Chair Glide | White | Pack of: 25
#adPlease be sure to measure accurately -measure the cleaned opening inside diameter. We also offer one to fit 1 1/2" and is slightly more common size. Provides a smoother movement of furniture, allowing patio furniture to slide over the surface of your patio.
More information #ad
Please be certain- to measure the inside diameter of hole and it is 1 1/4". Be sure to clean out hole first and measure accurately. Fits only exact 1-1/4" inside diameter cup on patio furniture feet. Glide installs inside the metal cup on the bottom of the chair or table.| Brand | Sunniland Patio #ad |
| Manufacturer | Sunniland Patio #ad |
| Length | 1.25 Inches |
| Weight | 0.04 Pounds |
| Part Number | SP-30-613 |
| Model | SP-30-613 |
More information #ad
5. Sunniland Patio
#ad1-1/2" Deluxe Wrought Iron Chair Glide | Black | Pack of: 16…
#adMore information #ad
Important-always scrape away any worn metal or remains of old cap- before measuring and installing. Protects your patio surface, patio chair feet and patio legs from damage. Glides install inside the metal cup on the bottom of the chair or table.| Brand | Sunniland Patio #ad |
| Manufacturer | Sunniland Patio #ad |
| Weight | 0.24 Pounds |
| Part Number | . |
| Model | . |
More information #ad
6. JSP Manufacturing
#adPlastic 1.5-inch Wrought Iron Patio Furniture Glide Caps 48, Black
#ad5 inches in diameter. Prevent scratching on your patio floors, while providing smoother furniture movement ~ Convenient weep holes - keeps moisture and condensation out and avoids damage to your patio furniture legs.
More information #ad
Plastic 1. 5-inch wrought Iron Patio Furniture Glide Caps. Heavy duty, and durable, designed to pressure fit into the cup on the bottom of your chair or table legs ~ Easy to Install with only a rubber mallet – No Adhesive Required DO NOT USE HAMMER.| Brand | JSP Manufacturing #ad |
| Manufacturer | JSP Manufacturing® #ad |
More information #ad
7. Sunniland Patio
#ad1/2" Nylon Stem Bumper | Glides | Floor Protectors for Patio Swivel Chairs | Pack of: 25 Natural White
#adProtects your patio surface, patio chair feet and patio legs from damage. Base actual part touching floor is 1/2". Stop the screech!! provides a smoother movement of furniture, allowing patio furniture to slide over the surface of your patio.
More information #ad
Glide installs inside the holes on the round base of swivel chairs. If your hole is smaller- use 15/64" drill bit to open hole to size or if it is a little larger- try using a small amount of silicone adhesive to hold in place.| Brand | Sunniland Patio #ad |
| Manufacturer | Sunniland Patio #ad |
| Weight | 0.04 Pounds |
| Part Number | SP-30-611 |
More information #ad
8. Project Patio
#ad24 Pack, Project Patio 1-1/2" Wrought Iron Patio Furniture Feet and Outdoor Chair Glide Leg Protector Cap Inserts
#adThey also stop rust marks from staining your flooring. Relief - after installing these replacement leg caps, expect the smoother movement of your lawn furniture and say goodbye to that screeching sound every time you move a table or chair.
More information #ad
Use a rubber hammer or mallet to install the chair caps. Is this the size you need? these are not a universal fit! These glides install inside wrought iron furniture feet cups with a 1-1/2" inside diameter. Quality - the patio furniture feet are a thick, UV-resistant plastic designed to withstand the outdoor elements. See images. We highly recommend cleaning the inside of the cup before installation.| Brand | Project Patio #ad |
| Manufacturer | Project Patio #ad |
| Height | 0.65 Inches |
| Length | 1.7 Inches |
| Width | 1.5 Inches |
| Part Number | DeluxeCap1.5White |
| Model | DeluxeCap1.5White |
More information #ad
9. Abacus Swivel Chair Parts
#ad#1719-17 Table or Chair Outdoor Glide 1-1/4 White. 17 Pack
#adAbacus Swivel Chair Parts #ad - Easy to install - Measure inside metal cup diameter. Not for hollow tubular legs. Package of 17 pcs. 1 1/4" round White Plastic. Press fit weld cup insert Glide, Fits iron metal furniture 1 1/4" Pad.More information #ad
| Brand | Abacus Swivel Chair Parts #ad |
| Manufacturer | swivel-chair-parts.com #ad |
| Part Number | 1719 |
| Model | 1719 |
More information #ad
10. Sunniland Patio
#ad3/4" Nylon Stem Bumper | Glides | Floor Protectors for Patio Swivel Chairs | Pack of: 25 White
#adIf hole is smaller- you can drill out to 1/4". Glide installs inside the holes on the round base of swivel chairs. Stop the screech!! provides a smoother movement of furniture, allowing patio furniture to slide over the surface of your patio.
More information #ad
Quantity of 25. Round base is 3/4" diameter. Length of shaft is 1/2" long. Please be sure to check your hOLE SIZE. These stem bumper chair glides fit a 1/4" diameter hole on patio furniture swivel rockers and other types of furniture where a hole in frame that is 1/4" exists or can be drilled.| Brand | Sunniland Patio #ad |
| Manufacturer | Sunniland Patio #ad |
| Height | 0.5 Inches |
| Length | 0.75 Inches |
| Width | 0.75 Inches |
More information #ad
