As an Amazon Associate I earn from qualifying purchases.
DNA MOTORING #ad - Tubular design with equal Runners to Ensure Equivalent Exhaust Flow Rate from each Cylinder. Made of high quality t-304 polished Stainless Steel Alloy Material for Strength and Durability.
PG POWERGO MOTORSPORT #ad - Tubular manifold design with separate tube for each cylinder, for better exhaust flow and more top end power. Built with 3. 0mm thickness schedule 40 precast 304 stainless steel pipes; designed for high output setups with up to 800whp.
DNA MOTORING #ad - Made of ceramic-coated T-304 Stainless Steel. Top mounted Turbo Orientation. 44mm v-band waste gate port / 44mm ID Primary Piping. Flanged for T3 Turbocharger. 12mm thickness manifold and Turbo Flange / 14 Gauge / 2mm Piping Wall.
Skunk2 Racing #ad - Not compatible with oem d-series throttle body. Bolt-on fitment compatible with all OEM sensors. Fitment: 1988 - 2000 honda civic 1. 6l cx/dx/ex/gx/hx/lx, 1993 - 1997 honda del sol 1. 6l s/si and 1988 - 1991 honda CR-X 1. 6l s/si.
Skunk2 Racing #ad - Larger plenum and oversized runners for maximum power gains. 66mm throttle body opening can be port-matched up to 70mm. Not compatible with oem d-series throttle body. Bolt-on fitment compatible with all OEM sensors.
Bull Boost Performance #ad - Will only work on sOHC Civics for Skunk 2 intake manifold. Made from 6061 t-6 Billet Aluminum. D-series Engines. As pictured* performance Kit. D swap an6 side feed system kit.
1. DNA MOTORING
#adDNA Motoring TM-D-S-RH Stainless Steel Turbo Manifold
#adMore information #ad
38mm/ 35mm external waste gate port and Flange Included; Standard T3/ T4 Configuration Outlet. Increase engine Exhaust Output and Efficiency. Tig welded cnc machined Flange for Resistance against Cracking and Wearing.| Brand | DNA MOTORING #ad |
| Manufacturer | DNA MOTORING #ad |
| Part Number | TM-D-S-RH |
| Model | TM-D-S-RH |
| Warranty | Please contact the seller directly for warranty information for this product |
More information #ad
2. PG POWERGO MOTORSPORT
#adPOWERGO MOTORSPORT 2811632409 Exhaust Turbo Manifold Ram Horn T3 35/38mm W/G Schedule 40 304 Stainless Steel for Civic Del Sol CRX 1.5L 1.6L D15 D16 SOHC
#adMore information #ad
Equal length runners for balanced exhaust reversion and enhanced turbo performance. 13. 5mm thick steel plates and flattened by hydraulic press; with chrome coating. Sandblasted surface for extra hardness; all joints TIG welded for great resistance against cracking and wearing. Head flange laser-cut from 1/2 in.| Brand | PG POWERGO MOTORSPORT #ad |
| Manufacturer | PG POWERGO MOTORSPORT #ad |
| Height | 9 inches |
| Length | 15 inches |
| Weight | 15 pounds |
| Width | 9 inches |
| Part Number | 2811632409 |
More information #ad
3. DNA MOTORING
#adDNA Motoring TMBT3T4G3 Stainless Steel Top Mount Turbo Manifold
#adMore information #ad
| Brand | DNA MOTORING #ad |
| Manufacturer | DNA MOTORING #ad |
| Part Number | TM-B-T3T4-G3 |
| Model | TM-B-T3T4-G3 |
| Warranty | Please contact the seller directly for warranty information for this product |
More information #ad
4. DNA MOTORING
#adDNA Motoring TM-B-S-RH Stainless Steel Turbo Manifold
#adDNA MOTORING #ad - 38mm/ 35mm external waste gate port and Flange Included; Standard T3/ T4 Configuration Outlet. Tubular design with equal Runners to Ensure Equivalent Exhaust Flow Rate from each Cylinder.More information #ad
Made of high quality t-304 polished Stainless Steel Alloy Material for Strength and Durability. Increase engine Exhaust Output and Efficiency. Tig welded cnc machined Flange for Resistance against Cracking and Wearing.| Brand | DNA MOTORING #ad |
| Manufacturer | DNA MOTORING #ad |
| Part Number | TM-B-S-RH |
| Model | TM-B-S-RH |
| Warranty | Please contact the seller directly for warranty information for this product |
More information #ad
5. Skunk2 Racing
#adSkunk2 Racing 307-05-0260 Pro Series Silver Intake Manifold for Honda D-Series Engines
#adMore information #ad
Improved airflow and enhanced venturi effect. Made from highest quality A356 cast-aluminum. Ideal for turbocharged and naturally aspirated applications. 66mm throttle body opening can be port-matched up to 70mm. Must use larger-bore Skunk2 throttle body or similar. Larger plenum and oversized runners for maximum power gains.| Brand | Skunk2 Racing #ad |
| Manufacturer | Skunk2 #ad |
| Height | 0 inches |
| Length | 0 Inches |
| Weight | 5 Pounds |
| Width | 0 inches |
| Part Number | 307-05-0260 |
| Model | 307-05-0260 |
| Warranty | Skunk2 Racing warrants all products to be free from defects in materials and workmanship for normal use and service, regardless of mileage, for a period not to exceed 12 months from the original date of retail purchase. Parts returned must be determined by Skunk2 Racing to be defective prior to any warranty credit or replacement is issued. Skunk2 Racing's obligation under warranty shall be limited to repairing or replacing, at its discretion, any part proven defective. The customer must prepay transportation charges. Final determination of the suitability of the products for the use contemplated by the buyer is the sole responsibility of the buyer. |
More information #ad
6. DNA MOTORING
#adDNA Motoring TM-D-S-38 Stainless Steel Turbo Manifold
#adDNA MOTORING #ad - Tig welded cnc machined Flange for Resistance against Cracking and Wearing. Made of high quality t-304 polished Stainless Steel Alloy Material for Strength and Durability.More information #ad
Increase engine Exhaust Output and Efficiency. 38mm/ 35mm external waste gate port and flange Included; Standard T3/ T4 T03/ T04 Configuration Outlet. Tubular design with equal Runners to Ensure Equivalent Exhaust Flow Rate from each Cylinder.| Brand | DNA MOTORING #ad |
| Manufacturer | DNA MOTORING #ad |
| Part Number | TM-D-S-38 |
| Model | TM-D-S-38 |
| Warranty | Please contact the seller directly for warranty information for this product |
More information #ad
7. Skunk2 Racing
#adSkunk2 Racing 307-05-0265 Pro Series Black Intake Manifold for Honda D-Series Engines
#adMore information #ad
Improved airflow and enhanced venturi effect. Made from highest quality A356 cast-aluminum. Must use larger-bore Skunk2 throttle body or similar. Ideal for turbocharged and naturally aspirated applications.| Brand | Skunk2 Racing #ad |
| Manufacturer | Skunk2 #ad |
| Height | 0 inches |
| Length | 0 inches |
| Weight | 5 Pounds |
| Width | 0 inches |
| Part Number | 307-05-0265 |
| Model | 307-05-0265 |
| Warranty | Skunk2 Racing warrants all products to be free from defects in materials and workmanship for normal use and service, regardless of mileage, for a period not to exceed 12 months from the original date of retail purchase. Parts returned must be determined by Skunk2 Racing to be defective prior to any warranty credit or replacement is issued. Skunk2 Racing's obligation under warranty shall be limited to repairing or replacing, at its discretion, any part proven defective. The customer must prepay transportation charges. Final determination of the suitability of the products for the use contemplated by the buyer is the sole responsibility of the buyer. |
More information #ad
8. DNA MOTORING
#adDNA Motoring TM-K20-S Stainless Steel Turbo Manifold
#adDNA MOTORING #ad - 35mm/ 38mm external waste gate port and Flange Included; Standard T3 T03 Turbo Flange Configuration Outlet. Tig welded cnc machined Flange for Resistance against Cracking and Wearing.More information #ad
Made of high quality t-304 polished Stainless Steel Alloy Material for Strength and Durability. Tubular design with equal Runners to Ensure Equivalent Exhaust Flow Rate from each Cylinder. Increase engine Exhaust Output and Efficiency.| Brand | DNA MOTORING #ad |
| Manufacturer | DNA MOTORING #ad |
| Part Number | TM-K20-S |
| Model | TM-K20-S |
| Warranty | Please contact the seller directly for warranty information for this product |
More information #ad
9. DNA MOTORING
#adDNA Motoring TM-HYC02-T3 Stainless Steel Turbo Manifold
#adDNA MOTORING #ad - Increase engine Exhaust Output and Efficiency. Made of high quality t-304 polished Stainless Steel Alloy Material for Strength and Durability.More information #ad
Tubular design with equal Runners to Ensure Equivalent Exhaust Flow Rate from each Cylinder. Standard T3 Configuration Outlet. Tig welded cnc machined Flange for Resistance against Cracking and Wearing.| Brand | DNA MOTORING #ad |
| Manufacturer | DNA MOTORING #ad |
| Part Number | TM-HYC02-T3 |
| Model | TM-HYC02-T3 |
| Warranty | Please contact the seller directly for warranty information for this product |
More information #ad
10. Bull Boost Performance
#adD Series Fuel Rail System Kit Civic Manifold Gauge Line Hose D15 D16 D17
#adMore information #ad
| Brand | Bull Boost Performance #ad |
| Manufacturer | Bull Boost Performance #ad |
| Part Number | BBPer-KTcked-02 |
More information #ad
30-90% Disocunts Found!
We found that some of the products on this list are now discounted on Amazon! Do you want to see these products?
Disclaimer: We earn small fee from purchases made on Amazon.
